Common Garage Door Problems

Tips on Garage Door Installations and Professional Fixes to Common Issues

When installing a door garage, one has to be careful that they take into consideration a few important things. The weight of the door, creating sections that are pinch resistance and safety mechanisms when it comes to automatic door openers. Also applying containment cables, mounting rails etc.

The weight of the doors are important because if the springs are weakened, this could be an issue. As long as the springs are correctly positioned, this shouldn’t be a problem.

Pinch resistant garage door installations can avoid a person getting their fingers caught between the steel. Tips on Garage Installations .

Containment cables can be applied down the center of springs. If there is a plan to install containment cables it should be done professionally. Garage door installation Dallas TX will make sure that each installment has an auto-reversing mechanism. They will ensure that photoelectric eyes, are properly set up and applied on either side of the door.

Tips on Fixing Garage Door Issues

After a garage door has been installed, there may be problems to arise. Some issues may be simple and quick to take care of, while others may be a little more difficult. Garage door installation Dallas TX has experience with all types of snags that may come up.

Listed below are a few examples:

  1. Door will not open
  2. After closed, door will all of a sudden go back up
  3. Cracks in Door
  4. Door remote doesn’t work
  5. Rust

Garage door openers that are operated by chains may need lubricating if they stop working, due to friction. The same is true for drive-screw openers. A silicon-based emollient will need to be rubbed down the entire length of the garage of the opener. Garage Door Problems Issues and How to Fix Them.

If the garage door opens up, all of a sudden after being closed, than it may be there is an issue with the safety feature. Photo-eyes are found on both sides of the garage door. They come in the form of plastic devices. To check to see if they are working properly, look for a flashing light on the device. The flashing light is typically green. If no flashing light than the device may not be working.

When checking the device remove any objects that may be covering it. Than make sure it is properly aligned, by taking measurements. Adjust the Photo-eyes accordingly after the measurements.

Some garage doors suffer from cracks. A simple solution is to fill the cracks with a waterproof sealant. Reasons Why Your Garage Door Will Not Work. If the door remote stops working, check the battery. If the batteries are fine, then retrieve the manual and reprogram it. This could be a simple fix.

Rust has been an issue for garage door openers for a while. A simple solution could be to wash down the area with a soapy solution, using dishwasher detergent or a similar detergent. Afterwards, rub down the area with vinegar with a cloth. Vinegar breaks down rust in a natural effective way. Next, use sandpaper to smooth down the area.

Garage door specialists are trained to quickly identify the issue. Once the issue has been identified they then will work expeditiously to fix it. Whether it’s something as simple as a pestering continuous noise or a garage door that need it’s springs replaced.

A garage door that doesn’t work properly can be a huge inconvenience, especially if it’s normally used everyday. A specialist can make sure that everything gets back on track, so that life can get back to normal.