Reasons Why Garage Door Springs Break?
Picture this; you are in a rush to get to work; you get down to your garage, then you push the open button. Rather than getting that seamless opening you are used to, all you get is a deafening bang. What just went wrong? Well, your garage door spring just malfunctioned. In this guide, you will be taken through 7 reasons why a garage spring door may break. Read on as we start with wear and tear.
Wear and Tear
The springs on your garage door are designed to go through several cycles. That is between 10,000 to 15,000 then they will wear down upon completion. The more you keep using the garage door, the more you wear the number of cycles down. It will eventually reach the limit and break.
Corrosion
Your garage door is always facing weather elements. This exposure may cause the spring to get rust and start corroding. As a result, their structure weakens, and they become vulnerable to breaking. However, this can be mitigated by application of lubricants and frequent maintenance.
Lack of Maintenance
The spring on your garage door is a mechanical component that requires regular maintenance to keep them in working order. Negligence to keep up with the maintenance routine can cause them to wear off prematurely and eventually break. You must examine your door thrice a month and address any signs of spring damage.
Incorrect Spring Type
Spring is designed with the weight of your garage door in mind. You have to pick the right spring that will handle your garage door’s demands. If you use the wrong spring, you will give the mechanism too much stress, eventually breaking.
Harsh Temperatures
Spring may be made of steel, which means they conduct heat depending on the surroundings. The springs will start expanding and contracting if there are fluctuations between freezing temperatures and scorchy conditions. Eventually, they will lose their structural integrity and break down. It will be best if you invest in a temperature-resistant garage door spring.
Poor Installation
Installing a garage door spring requires precision. The door must be appropriately aligned to spread the spring’s tension evenly. Wrongful installation means some springs will get much pressure and fade out more quickly than others, with less stress. So, whenever you install a garage door, have a professional do it.
DIY Repairs
Saving money is tempting, but don’t let that urge send you down the DIY road when repairing your garage door. Messing with the door alignment during the repairs or placing the spring in the wrong order will be a recipe for disaster. The springs are under super tension, and a severe injury may follow if they are mishandled. Please leave the repairs to a technician.
Conclusion
A garage door spring breakage is a frustrating and inconvenient phenomenon. Yet familiarizing yourself with the reason behind garage door spring failure may brace you up to thwart such challenges.
All in all, installation may be done appropriately, maintenance be in order, and repairs done by a technician, but still, they break down. Again you are to blame since you trusted the wrong garage door spring manufacturer.
However, GL Metal is here to provide technical support and certified garage door springs.
Michelle Joe is a blogger by choice. She loves to discover the world around her. She likes to share her discoveries, experiences, and express herself through her blogs.
