How To Make Curtain Tie Backs The Easy Way? | Simple Steps
For window treatment finishing, curtain tie-backs are one of the most affordable, functional, and stylish accessories. These drapes’ hold-back elements serve as the accent piece to the interior decor of your rooms. Being the most practical and useful element, it is required to control the opening and closing of drapes according to the needs of the hour or preferences.
In many cases, it is hard to find the perfect match for your curtain hold-backs that sync your drape styles and are also functional. Whether you are purchasing a tie-back or DIY-making one for your drapes, it is crucial to select or make one considering the weight of your curtains.
Step By Step Procedure To Create DIY Curtain Tie-Backs
Although you can shop for drape hold-backs from any shop, it is difficult to find the perfect match coordinating with your Dubai Curtain styles. To make this drape accessory, you’ll need some tools and supplies listed below.
Grab Needed Tools & Materials
Below mentioned tools are necessary to carry out this DIY process flawlessly.
- Measuring tape
- Quarter Of Fabric
- 1/2 inch wide Velcro
- Matching Thread
- Iron
- Scissor
- Pins
- Optional Rotary Cutter & Mat
- Thread Nippers
- Sewing Machine
- Fabric Marker Or Chalk
1. Take Measurements
When it comes to making curtain hold-back accessories, you need to take accurate measurements for the fabrics. The window dimensions and curtain fabrics for every interior design can be different according to the space’s magnitude.
Use a tape measure to note down the dimensions and for this purpose loop the tape around the gathered fabric while mimicking the length of the tie-back to get hooked on the wall. After you get the length details, make sure to add an extra few inches in case you will make a bow or tie a knot afterward.
2. Decide Your Width
The width of the hold-backs is the most integral aspect to consider. It can be decided based on the weight of your intended drapes. Curtains for windows are made from different types of heavy and lightweight fabric materials, offering varying weights depending on their pile density and knots per inch.
You can also personalize the curtain width following your preferences. After you decide on the ideal width, make it double. Additionally, allow an extra inch to make the seams later.
3. Iron And Cut The Fabric
Now that you have got all the required measurements, you can use any scrap piece or the remaining fabric material from your installed curtains. It will provide you with a perfectly aligned piece with a curtain style for hold-backs.
For a curtain fabric piece, you have to cut it to the accurate measurements that you have already taken. Use iron on an appropriate heat to remove creases from the fabric (if any). Then mark the lines using a marker or chalk to cut the fabric to the exact dimensions. Using a sharp scissor, cut the fabric into two pieces.
4. Sew The Cut Piece
Now is the time to stitch down the cut piece in the form of a long tube in length. When stitching using a sewing machine, ensure keeping the wrong side facing outwards. You have to sew only one end of the fabric piece at first, allowing a ½ for seams.
After sewing down the piece in full length and one end, use a thin yet straight ruler to push the fabric inside out to bring the right side out. This can happen within a moment and this technique is simple for the tailors. Being an amateur, you can get help from the individuals who know this sewing hack.
5. Seal The Open End & Opt For Finishing
After you bring the right side out from the fabric, tuck in that ½ portion of the fabric you left for seams. Now seal down the open end of the tie-back by using your hand. You can go for hand tucking or also apply glue with a hot gun if available.
Now that you have created a DIY hold-back curtain accessory, it’s time for a finishing touch that you can do by adding plastic or wooden rings or decorative knots. Also, you can install hooks on the walls that will hold these tie backs for a trendy interior touch.
Final Thoughts!
Curtain tie-backs/ holdbacks are the most efficient way to control the activity of opening and closing drapes in your living spaces. To hold your curtains at a specific place, you can use different types and styles of drape hold-back accessories. To make one for your drapes, you’ll need to collect all the materials and sewing tools that are often easily accessible in any home.
By taking measurements to decide on the ideal width, you can begin with the cutting process. Use sharp scissors to cut the fabric and seal the open end. Lastly, you can go for finishing by attaching any stylish loop of threads or hooks on the walls for holding purposes. Hopefully, you can DIY make a tie-back easily by following the detailed yet comprehensive steps mentioned in this guide.
